So, your Noise Pulse Go Buzz Smart Watch has suddenly stopped working—or maybe it won’t charge, the screen is frozen, or it just won’t sync to your phone. Don’t panic! You’re definitely not the only one.
This guide covers real-world fixes, easy troubleshooting steps, and community-tested tips to get your watch back on your wrist and working like new.
Let’s get right into it.
Common Issues with Noise Pulse Go Buzz (and How to Fix Them)
1. Watch Won’t Turn On or Charge
This one’s a classic.
Fixes:
-
Check your charger: Make sure you're using the original magnetic charging cable. Avoid turbo or fast chargers—they can mess with the charging circuit.
-
Clean the contacts: Wipe the back of your watch and the charger pins with a dry cloth. Sweat or grime buildup can block the connection.
-
Secure the cradle: Line up the pins until you feel the magnets pull the watch into place. You should see a charging icon.
-
Force start it: Charge for 30 minutes, then press and hold the power button for 10-15 seconds.
Still not powering up? Try a different USB power source or cable just to rule out hardware issues.
2. Bluetooth Keeps Disconnecting
Nothing’s more annoying than a watch that won’t stay connected.
Fixes:
-
Restart both devices – Watch and phone.
-
Re-pair through the NoiseFit app: Forget the device from your Bluetooth settings first.
-
Grant permissions: Go to your phone settings and ensure the NoiseFit app has Bluetooth, Location, and Notification access.
-
Disable battery optimization on your phone for the NoiseFit app so it doesn’t get kicked out of memory.
Helpful Link: How to connect my Noise Pulse Go Buzz to my phone?
3. SpO2 or Heart Rate Not Reading Properly
If your readings are all over the place, here’s why it might be happening:
Fixes:
-
Wear the watch snugly (not too loose or too tight).
-
Place it about an inch above your wrist bone.
-
Stay still while measuring—movement messes with the sensors.
-
Clean the sensor with a soft, dry cloth.
Also, cold hands or low battery might mess with the readings. Let your body warm up first.
4. Not Getting Notifications
You’ve got messages coming in, but your watch isn’t buzzing?
Fixes:
-
Allow permissions in the NoiseFit app. Go to Settings > Notifications > Toggle on apps like WhatsApp, Gmail, etc.
-
Disable DND mode (both on your phone and the watch).
-
Check app notifications on your phone—some battery-saver modes silence them.
Helpful Link: I’m not receiving notifications on my watch – Noise Support
5. Auto Sports Mode Not Detecting Activities
It’s supposed to auto-detect 100+ sports, but maybe it’s slacking.
Fixes:
-
Make sure Auto Sports Detection is enabled in the app.
-
Some light movements (like a casual stroll) might not trigger it—try something more active.
-
Update the firmware via the NoiseFit app if available.
When All Else Fails: Try a Factory Reset
This is the ultimate “turn it off and on again.”
How to do it:
-
On the watch, swipe down and tap Settings.
-
Scroll down and tap Reset.
-
Confirm.
Warning: This will erase everything on the watch, so only do it if nothing else works.
Factory Reset Guide: Noise ColorFit Pulse Go Buzz – Reset Instructions
Still Not Working? Contact Noise Support
If your watch is still misbehaving, it might be a hardware issue.
-
Noise Support Email: support@nexxbase.com
-
Customer Care: 022 6805 6040 (Mon–Sat, 9:30 AM–6 PM)
-
Warranty: 1-year warranty on manufacturing defects
-
Help Center: Noise Support Portal
Community Fixes and Tips
Sometimes the best tips come from other users:
-
Reddit: r/IndianTech, r/Wearables
-
Facebook Groups: Search “Noise Smartwatch Owners” or “Noise India Community”
-
YouTube: Quick video fixes for strap issues, sensor alignment, and firmware updates
Feel free to share your own fix in the comments—it might help someone else out!
FAQ – Noise Pulse Go Buzz Troubleshooting
Q: Can I use a fast charger with the Noise Pulse Go Buzz?
A: Nope! Stick to a standard 5V/1A charger to avoid damaging the battery.
Q: Why isn’t my watch showing incoming calls?
A: Ensure the NoiseFit app has phone and call access permissions, and Bluetooth Calling is turned on in the app.
Q: The screen isn’t waking when I raise my wrist—what gives?
A: Go to NoiseFit app > Device Settings > Enable “Raise to Wake.” Also, make sure the battery isn’t critically low.
Q: Can I replace the straps?
A: Yep! It supports detachable straps—just make sure the replacement fits the 22mm lug size.
Final Thoughts
The Noise Pulse Go Buzz is packed with features, but like any gadget, it can hit a few bumps. Thankfully, most problems are quick to fix with a little patience—and if not, there’s always support (and the community) to help you out.
Have a tip or fix that worked for you? Drop it in the comments below!
Related Articles:
Looking for alternatives or considering an upgrade from the Noise Pulse Go Buzz? Check out our detailed comparison of the Redmi Watch 5 vs. Redmi Watch 5 Lite to see which budget-friendly option suits you best. If you're eyeing premium fitness trackers, don’t miss our take on the Xiaomi Smart Band 9 Pro vs Competitors. And for those who value long battery life above all, explore the Top Battery Life Watches: Huawei GT 5 vs Competitors to find your perfect match.
Comments
Post a Comment