DOOM: The Dark Ages Update 5 Frame Generation Stuttering Fix (High FPS but Choppy)

Updated November 18, 2026

If DOOM: The Dark Ages suddenly feels choppy after Update 5, even though your FPS counter shows 100, 120, or more frames per second, Frame Generation may be involved.

Players have experienced severe micro-stuttering when strafing, turning the camera, or moving through combat. For some, disabling Frame Generation restores smooth gameplay immediately.

The frustrating part is that the FPS counter can indicate better performance while the game actually feels worse.

Update 5 introduced Slaughter Mode and expanded AMD FSR support. Shortly afterward, Frame Generation and frame-pacing problems became noticeable on some PC configurations, particularly when using NVIDIA DLSS Multi Frame Generation.

There is no confirmed universal fix for this regression. However, several troubleshooting steps can help identify the cause or restore smoother gameplay without making unnecessary changes to your system.

Quick Answer: What Should You Try First?

If Frame Generation became choppy after Update 5:

  1. Disable Frame Generation and compare gameplay in the same location.
  2. If turning it off fixes the stutter, enable it again and restart the game.
  3. On NVIDIA GPUs, reset custom DLSS Frame Generation overrides to Use the 3D application setting.
  4. If you previously forced Frame Generation Model B, test the game's default model or Model A.
  5. Check whether G-Sync, V-Sync, Reflex, or an FPS limiter is behaving unexpectedly.
  6. If an FPS cap causes worse stuttering or input lag, remove it and compare again.
  7. Test Static instead of Dynamic Resolution Scaling if that option is available.

Important: These are diagnostic steps and previously successful workarounds, not guaranteed fixes for every Update 5 configuration.

If the game only runs smoothly with Frame Generation disabled, keeping it disabled is a reasonable temporary solution.

What Players Are Experiencing After Update 5

One of the clearest symptoms is a large difference between the FPS counter and how smooth the game actually feels.

For example, an affected configuration can behave like this:

Configuration Gameplay result
Frame Generation OFF Around 90 FPS, smooth
Frame Generation x2 ON Around 129 FPS, severe judder
Fullscreen / Borderless switching No improvement
Forced V-Sync No improvement
Changing scaling settings No improvement

The stuttering becomes particularly noticeable when moving sideways or rotating the camera.

Other affected configurations show similar behavior with higher Frame Generation multipliers, including x3 and x4.

Additional symptoms can include:

  • Frame Generation feeling less responsive than before the update.
  • Micro-stuttering during normal movement despite high FPS.
  • Flickering or uneven motion when turning the camera.
  • G-Sync behaving unexpectedly with Frame Generation enabled.
  • NVIDIA Reflex not maintaining the expected frame-rate behavior.
  • FPS falling below previously achievable performance levels.

The issue has appeared on systems using RTX 5070 and RTX 5070 Ti graphics cards, including Windows 11 configurations. Similar frame-pacing complaints have also occurred through PC Game Pass.

However, not every system is affected. Some RTX 5080 configurations continue to run smoothly with Frame Generation x2.

This suggests the problem depends on the graphics configuration rather than affecting every installation of Update 5.

Quick Symptom Checklist

What you notice What to test first
High FPS but choppy camera movement Disable Frame Generation
Stuttering only with x3 or higher Test x2
Stuttering after changing DLSS presets Restore NVIDIA DLSS overrides
G-Sync or Reflex behaving strangely Check synchronization settings
Severe lag after applying an FPS cap Remove the cap
Stuttering even without Frame Generation Check scaling, rendering load and drivers

The most useful first step is comparing gameplay with Frame Generation enabled and disabled while keeping everything else unchanged.

⬆ Back to Table of Contents

Why High FPS Can Still Feel Choppy

Frame Generation creates additional displayed frames between frames rendered normally by the game.

That can make motion appear smoother when frame delivery is consistent. However, it does not automatically eliminate uneven frame pacing or improve input responsiveness.

For example, a system might display 130 FPS with Frame Generation enabled while feeling less consistent than it does at 90 FPS without the feature.

This happens because displayed FPS and smooth frame delivery are not the same thing.

Several factors can contribute to choppy gameplay:

  • Irregular delivery of rendered or generated frames.
  • Conflicting or ineffective FPS limits.
  • Frame Generation overrides behaving differently from the game's native implementation.
  • Low or inconsistent base rendering performance.
  • Driver and display synchronization interactions.
  • Changes in how the game handles rendering after an update.

A high FPS counter does not necessarily reveal short frame-time spikes or increased input latency.

This becomes especially noticeable in DOOM because its combat requires constant movement, rapid camera turns, and precise timing.

The exact cause of the Update 5 regression has not been established for every affected configuration, so it is better to test these possibilities individually.

⬆ Back to Table of Contents

Fix 1: Disable Frame Generation to Confirm the Problem

This is the most important first test.

  1. Launch DOOM: The Dark Ages.
  2. Open the game's Video or Graphics settings.
  3. Find the Frame Generation option.
  4. Turn Frame Generation OFF.
  5. Return to the same gameplay location.
  6. Rotate the camera, strafe, and move through an area where the stutter was noticeable.
  7. Compare the results with Frame Generation enabled.

What the Result Means

Smooth with FG OFF, choppy with FG ON: Frame Generation or its interaction with your current graphics configuration is a likely trigger.

Choppy with FG both ON and OFF: The issue may involve ordinary rendering performance, GPU drivers, overlays, or another post-update problem.

Only higher Frame Generation multipliers stutter: Test x2 before returning to x3, x4, or higher modes.

Do not change resolution, ray tracing, display mode, and Frame Generation simultaneously. Keeping other settings unchanged makes the comparison more reliable.

If disabling Frame Generation immediately restores smooth gameplay, you have already identified a practical temporary workaround.

Should You Leave Frame Generation Disabled?

If the game feels noticeably smoother without it, yes.

Stable frame pacing and responsive controls are usually more valuable during fast combat than a higher displayed FPS number.

You can return to Frame Generation later after testing the other fixes.

⬆ Back to Table of Contents

Fix 2: Restart the Game After Enabling Frame Generation

Some configurations have experienced Frame Generation problems that improved after enabling the feature and restarting the game.

This is worth testing because it is quick and reversible.

  1. Enable the Frame Generation mode you normally use.
  2. Apply the graphics settings.
  3. Exit the game completely.
  4. Launch DOOM: The Dark Ages again.
  5. Load the same gameplay area and test movement.

If x3 or x4 remains choppy, repeat the test using x2.

Do not simply return to the main menu. Close the game fully before reopening it.

Note: Restarting has helped with similar Frame Generation behavior in earlier game versions, but it is not a guaranteed solution for Update 5.

If restarting does not help, continue to the NVIDIA override checks.

⬆ Back to Table of Contents

Fix 3: Reset NVIDIA DLSS Overrides

On supported NVIDIA GPUs, the NVIDIA App can override certain DLSS features and model selections.

These overrides can differ from the implementation normally selected by the game.

An override that worked with an earlier version may not behave identically after an update.

Restoring the game's native DLSS settings is therefore a useful troubleshooting step, particularly if you manually changed Frame Generation models or multipliers.

How to Restore the Game's Default DLSS Settings

  1. Close DOOM: The Dark Ages.
  2. Open the NVIDIA App.
  3. Select Graphics.
  4. Open Program Settings.
  5. Choose DOOM: The Dark Ages.
  6. Scroll to the Driver Settings section.
  7. Locate DLSS Override - Frame Generation.
  8. Set it to Use the 3D application setting.
  9. Open DLSS Override - Model Presets.
  10. Restore manually forced Frame Generation presets to Use the 3D application setting.
  11. Apply the changes and relaunch the game.

Test the game's native Frame Generation implementation before adding another custom override.

If the NVIDIA App does not display a particular option, skip it rather than attempting to force unsupported settings.

NVIDIA provides additional details in its official DLSS override instructions.

What if Resetting the Overrides Does Not Help?

Leave the default settings enabled while testing the next step.

A clean baseline is important because combining several custom overrides can make it difficult to identify which change is causing stuttering.

⬆ Back to Table of Contents

Fix 4: Test Frame Generation Model A Instead of Model B

This is a useful secondary test for affected NVIDIA systems.

Some DOOM: The Dark Ages configurations have experienced severe stuttering when the NVIDIA App forces Frame Generation Model B.

Switching to Model A restored smoother Frame Generation behavior for some players.

How to Test Model A

  1. Open the NVIDIA App.
  2. Select DOOM: The Dark Ages under Graphics → Program Settings.
  3. Find DLSS Override - Model Presets.
  4. Choose Custom, if available.
  5. Under Frame Generation, select Model A.
  6. Apply the change.
  7. Restart the game.
  8. Compare performance in the same gameplay location.

If Model A makes no difference, restore Use the 3D application setting.

Is Model A Confirmed to Fix Update 5?

Not universally.

Model A has resolved similar stuttering problems on some systems, but those successful cases do not establish that it fixes every new Update 5 regression.

It is most relevant if you previously forced Model B or another custom Frame Generation preset.

If your game already uses its native Frame Generation model and runs smoothly without overrides, there is no reason to force Model A.

⬆ Back to Table of Contents

Fix 5: Check G-Sync, Reflex, V-Sync and FPS Limits

One of the more specific problems involves Frame Generation not maintaining the expected frame-rate behavior on variable refresh rate displays.

For example, an RTX 5070 Ti configuration using a 120 Hz G-Sync monitor has shown 120 FPS when the player expected a limit around 114 FPS.

That does not prove NVIDIA Reflex is broken, but it makes synchronization settings worth checking.

Step 1: Confirm Your Monitor Refresh Rate

In Windows 11:

  1. Open Settings.
  2. Select System → Display.
  3. Open Advanced display.
  4. Confirm that the monitor is using its intended refresh rate.

Make sure the selected refresh rate matches the monitor used by the game.

If you use multiple displays, check the correct one.

Step 2: Test an FPS Limit

Some players prefer limiting FPS slightly below the monitor's maximum refresh rate.

For example:

Monitor refresh rate Example test cap
120 Hz 117 FPS
144 Hz 141 FPS
165 Hz 162 FPS
240 Hz 237 FPS

These are examples for testing, not guaranteed optimal settings.

Apply a suitable limit using an available in-game or driver option. Then check whether the actual frame rate follows it.

Important: Some DOOM configurations do not respect NVIDIA's configured FPS limits when Frame Generation is enabled.

If the displayed frame rate ignores your cap, repeatedly lowering the configured number may not fix the problem.

Step 3: Remove the FPS Cap if It Makes Stuttering Worse

Do not assume that limiting FPS always improves Frame Generation.

An affected player using a 200 Hz monitor experienced severe stuttering and around 200 ms of reported latency when limiting the game to 197 FPS after Update 5.

Removing the frame-rate cap improved responsiveness.

This is an important distinction because a cap that works perfectly in another game, or worked before Update 5, may produce a different result here.

If you notice worse stuttering after applying a limit:

  1. Record the FPS and latency behavior.
  2. Remove the custom frame-rate cap.
  3. Return to the same gameplay area.
  4. Compare motion smoothness and responsiveness.

If uncapped gameplay is smoother, leave the cap disabled while testing other settings.

Running uncapped may increase GPU usage, power consumption, and temperatures, so monitor those values.

A frame-rate cap should improve frame pacing, not introduce severe input lag. If it makes the problem worse, revert it.

Step 4: Avoid Conflicting G-Sync and V-Sync Overrides

Certain RTX 50-series configurations can encounter crashes when G-Sync or V-Sync is combined with Multi Frame Generation through NVIDIA Control Panel.

Bethesda specifically warns about this behavior in its official RTX 50-series troubleshooting guide.

For this reason:

  • Do not force several synchronization options simultaneously.
  • Restore unusual driver-level overrides before testing.
  • Prefer supported in-game controls where possible.
  • If changing synchronization settings causes a crash, revert the last change.
  • Test with Frame Generation disabled if the problem continues.

If you want G-Sync or V-Sync alongside Multi Frame Generation, follow Bethesda's guidance about using the game's supported settings rather than forcing a conflicting configuration through NVIDIA Control Panel.

What if V-Sync Still Shows as Enabled?

On some RTX 40-series and RTX 50-series configurations, DOOM may continue displaying V-Sync as enabled after Frame Generation is activated.

Bethesda identifies this as a display issue with the settings interface: V-Sync is disabled in those circumstances even though the option may still appear enabled.

Do not repeatedly force additional driver-level changes merely because the menu appears incorrect.

Step 5: Compare NVIDIA Reflex Behavior

If NVIDIA Reflex is available in your configuration, compare its supported in-game settings while keeping the other options unchanged.

Watch for:

  • Changes in input responsiveness.
  • Unexpected FPS limits.
  • Stuttering during camera movement.
  • Increased latency when Frame Generation is enabled.

A high FPS number alone does not confirm that Reflex and Frame Generation are working as expected.

If the game is smooth without Frame Generation but becomes inconsistent with it, return to the stable configuration instead of stacking multiple synchronization overrides.

⬆ Back to Table of Contents

Fix 6: Change Resolution Scaling and Reduce GPU Load

Another option is to test the game's resolution-scaling behavior.

If Resolution Scaling Mode is currently set to Dynamic, try switching to Static.

Dynamic scaling adjusts the internal rendering resolution to help maintain performance targets. Although useful during demanding combat, changing scaling behavior may help diagnose frame-time fluctuations.

Suggested Test

  1. Record your current resolution-scaling settings.
  2. Switch Dynamic scaling to Static, if the option is available.
  3. Keep the same DLSS or FSR quality preset initially.
  4. Test the same gameplay area.

If performance does not improve, restore your previous settings.

You can also reduce demanding graphics settings to test whether the problem is related to rendering load.

For example, temporarily disable Path Tracing if it is enabled.

If performance becomes smooth after reducing the rendering load, your base frame rate or GPU workload may be contributing to the problem.

Which DLSS Quality Mode Should You Use?

There is no single correct DLSS mode for every GPU and resolution.

Start with the mode you normally use, then compare alternatives.

  • Quality: Higher internal rendering resolution and image quality, but greater rendering load.
  • Balanced: A compromise between image quality and performance.
  • Performance: Lower internal rendering resolution for additional performance.
  • Ultra Performance: Greater performance headroom at the cost of more noticeable image-quality reductions.

If your current mode cannot maintain a stable base frame rate, testing Balanced or Performance may help.

Some configurations have also shown different frame-rate-limiting behavior after changing DLSS quality modes.

However, there is no general requirement to use Performance or Balanced for Frame Generation to work correctly.

Do not automatically select Ultra Performance unless the additional headroom is necessary.

The goal is consistent rendering performance, not simply the highest FPS number.

⬆ Back to Table of Contents

What About AMD FSR 4 Frame Generation?

Update 5 expanded AMD FSR support on compatible GPUs, including FSR Upscaling 4.1 and Frame Generation 4.

The update also enabled FSR Frame Generation on eligible Intel GPUs that meet the necessary hardware and driver requirements.

These changes are documented in the official DOOM: The Dark Ages Update 5 release notes.

NVIDIA DLSS 4.5 and additional Multi Frame Generation modes were introduced in the earlier Update 4, so the new FSR additions should not be confused with those earlier NVIDIA changes.

Are AMD and NVIDIA Experiencing the Same Issue?

Not necessarily.

Some NVIDIA configurations show similar stuttering with both DLSS and FSR Frame Generation.

However, separate AMD Radeon configurations have also experienced post-update stuttering without Frame Generation or FSR enabled.

Those symptoms may have different causes.

AMD Users Should Test the Following

  • Disable FSR Frame Generation and compare gameplay.
  • If supported, test the available FSR options separately.
  • Avoid changing upscaling, Frame Generation, and multiple other graphics settings at once.
  • Check whether the problem remains with Frame Generation disabled.
  • Temporarily disable third-party overlays if stuttering persists.

If you previously installed third-party upscaling or Frame Generation modifications, restore the original game configuration before investigating unusual compatibility problems.

Do not remove the game's native FSR files simply because Update 5 introduced new support.

NVIDIA-specific Model A and Model B instructions do not apply to AMD Frame Generation.

What if the Stuttering Happens Without Frame Generation?

If the game stutters even with Frame Generation disabled, the problem may not be related to generated frames.

Check whether the issue started after changing resolution scaling, rendering settings, or GPU drivers.

A temporary test with reduced rendering load can help identify whether GPU performance is involved.

One AMD Radeon configuration also recovered from an unusually severe slowdown after resetting the Windows graphics driver using:

Win + Ctrl + Shift + B

This shortcut resets the Windows graphics subsystem and may cause a brief screen flicker. It is not a universal stuttering fix, and it is mainly worth considering when the entire graphics session becomes abnormally sluggish.

If the problem continues, restart Windows before making additional driver changes.

⬆ Back to Table of Contents

What to Do if Nothing Works

If Frame Generation remains choppy after the steps above, prioritize the smoothest stable configuration rather than forcing a higher generated FPS count.

For some players, this means disabling Frame Generation temporarily.

You can also try the following final checks:

  • Restart Windows and launch the game again.
  • Check for an available game update.
  • Confirm that your GPU driver installation is functioning normally.
  • Temporarily disable nonessential third-party overlays.
  • Restore custom NVIDIA DLSS overrides to the application's settings.
  • Recheck gameplay with Frame Generation disabled.

If the problem began immediately after a graphics driver update, consider whether a known-stable driver is available before attempting a rollback.

Avoid reinstalling Windows, deleting configuration files, or using aggressive driver-cleaning tools as your first response to a Frame Generation issue.

Information to Include When Reporting the Problem

Before reporting a persistent problem, collect:

  • GPU model and driver version.
  • CPU model.
  • Monitor resolution and refresh rate.
  • DLSS or FSR quality mode.
  • Frame Generation multiplier.
  • Whether G-Sync, V-Sync, or Reflex is enabled.
  • FPS with Frame Generation enabled and disabled.
  • Whether the issue began immediately after Update 5.
  • Whether the problem occurs in the campaign, Revelations, or Slaughter Mode.

A short gameplay comparison recorded in the same location can also help demonstrate the problem.

You can submit persistent issues through Bethesda's DOOM: The Dark Ages feedback page.

For direct troubleshooting assistance, use Bethesda Customer Support rather than the feedback form, which does not provide individual responses.

Returning to Revelations Combat

Once your frame pacing is stable, it becomes easier to handle the faster encounters and precision-based mechanics in Revelations.

If you are struggling with heavy demons, stagger windows, or Chain Spear timing, see our DOOM: The Dark Ages Revelations Boss Counter Guide for weapon combinations, defensive counters, and combat timing.

For one of the expansion's more demanding encounters, our Revelations Archvile Shield Cage Guide explains how to break the barrier, manage summons, and create safer damage openings.

These combat guides are particularly useful once performance issues are no longer interfering with movement and attack timing.

⬆ Back to Table of Contents

Frequently Asked Questions

Did Update 5 break Frame Generation in DOOM: The Dark Ages?
Some players experienced severe Frame Generation stuttering after Update 5, while others continue to report normal performance.

The regression appears to affect certain configurations rather than every PC. The exact underlying cause has not been confirmed for all affected systems.

Why Does DOOM Show 120 FPS but Feel Like 30 FPS?
Uneven frame pacing, inconsistent frame delivery, or Frame Generation-related problems can make gameplay appear choppy despite a high FPS counter.

Compare performance with Frame Generation disabled to determine whether generated frames are contributing to the problem.

Does Disabling Frame Generation Fix the Stuttering?
It can restore smooth gameplay when Frame Generation is the trigger.

However, some configurations also experience post-update stuttering without Frame Generation, so disabling it will not resolve every performance issue.

Does Switching NVIDIA Frame Generation to Model A Fix Update 5?
Model A has helped some players resolve similar Frame Generation stuttering problems, particularly when Model B was forced through the NVIDIA App.

It is worth testing if you use a custom preset, but it is not a guaranteed fix for Update 5.

Should I Cap My FPS Below My Monitor's Refresh Rate?
An FPS cap below the refresh rate can help with frame pacing in some configurations.

However, certain DOOM setups do not respect NVIDIA's configured FPS limits when Frame Generation is enabled.

There are also cases where applying a cap after Update 5 caused severe stuttering or increased latency.

If limiting FPS makes performance worse, remove the cap and compare again.

Why Does V-Sync Still Appear Enabled After I Turn It Off?
On some RTX 40-series and RTX 50-series systems, DOOM may show V-Sync as enabled when Frame Generation is active.

Bethesda identifies this as a settings interface issue. The game can disable V-Sync even when the menu still displays it as enabled.

Avoid forcing conflicting synchronization options solely to correct the display.

Is the Stuttering Limited to RTX 50-Series GPUs?
No definitive hardware restriction has been established.

Several affected configurations use RTX 50-series GPUs, but broader post-update frame-pacing problems have also appeared on AMD hardware.

These issues may not share the same cause.

Does Update 5 Affect AMD FSR Frame Generation?
Update 5 introduced expanded FSR 4 support, including FSR Upscaling 4.1 and Frame Generation 4 on compatible hardware.

If FSR Frame Generation causes stuttering, disable it and compare the same gameplay area before changing other settings.

Has Bethesda Released a Confirmed Fix for the Frame Generation Regression?
The initial Update 5 release notes do not identify a fix for the newly reported Frame Generation stuttering.

Until a confirmed solution is available, the troubleshooting steps above should be treated as diagnostics or temporary workarounds.

Is It Better to Play Without Frame Generation?
If disabling Frame Generation gives you consistently smoother movement, more predictable frame pacing, and better responsiveness, it may be the better choice for now.

A stable 90 FPS experience can feel significantly better than a choppy 130 FPS experience.

⬆ Back to Table of Contents

Final Thoughts

DOOM: The Dark Ages Update 5 Frame Generation stuttering is especially frustrating because the game can report high FPS while camera movement, strafing, and combat feel noticeably uneven.

The best approach is to determine whether Frame Generation is responsible before changing multiple graphics settings.

Start by disabling Frame Generation and comparing gameplay in the same location.

If that restores smooth performance, try restarting with Frame Generation enabled, resetting NVIDIA DLSS overrides, and carefully checking G-Sync, Reflex, V-Sync, and FPS limits.

For NVIDIA users, switching from a forced Model B preset to Model A may also help, although it is not a confirmed universal Update 5 solution.

Remember that an FPS cap is not always beneficial. If limiting the frame rate introduces severe stuttering or latency, remove the cap and return to the smoother configuration.

Until a confirmed fix is available, prioritize consistent frame pacing and responsive gameplay over the highest displayed FPS number.

⬆ Back to Table of Contents

Comments